A series of unique tapeable aluminium capping profiles, such as our tapeable glazing bar and fair end, guarantee clean lines and precise detailing, with seamless junctions between solid and glazed elements.
The tapered joggled, studs allow the outer layers of the board to be pinched in at the head, thereby eliminating flaring at the head once taped and filled and ensuring a true construction of 97mm constant thickness.
Optima 97 can accommodate a single or double layer of wall board to suit your acoustic specification, and plywood can be used in lieu of plasterboard where fixings into the drywall are required.
The system can be used in conjunction with Optima’s 117, 217 and Revolution glass partitioning systems. Whether you are looking to create full height plasterboard cross walls with crisp shadow gap details and a seamless interface with the glazed office fronts, or partial height drywall partitions with clerestory glazing, Optima 97 can provide a stunning solution.
Width is locally reduced (joggled) at head to allow outer layers of board to be pinched in. This allows the partition to be taped and filled but without the flaring at the head often associated with proprietary drywall. Studs are cold rolled from 0.6mm gauge galvanized steel. 45mm stud specified if double boarded. 70mm stud specified if single boarded.
Options: Flush (MDF or aluminium), recessed or surface fixed available in various finishes.
All exposed sections powder coated to any RAL colour in accordance with BS6496: 1984.
Fire tested to BS476: Part22: 1987. Report No. TE83026 30 minute fire rating.
Please see more on deflection head animation page.
Products installed in this project: Optima 117 single glazing, Optima 97 Advanced System Drywall...Read more.
Products installed in this project: Optima 97 Advanced Drywall, Optima 217 double glazing.... Read more.
Products installed in this project: Optima 97 Advanced System Drywall, Optima 117 with deflection head & Nebula™ dry joint... Read more.
Optima Advanced System Drywall can incorporate a unique extruded aluminium deflection head to accommodate up to +/- 25mm.
+/- 40mm deflection head can be achieved subject to special order. Please contact our Technical team.
Registered Architects can download the following on Optima's Website:
Register as an Architect or Designer to obtain access.